Tuma min na i ka kan ka bɔgɔdaga kɔrɔta lafiɲɛbɔ: Gafe ɲɛnama min bɛ tigɛ, ka sɔgɔsɔgɔ ani ka jeni ni kemikali ye

KELEN kɔrɔtalan  bɛ sama ka bɔ marayɔrɔ la. A ɲɛ ka ɲi—a tigɛcogo jɛlen tɛ, a sɛgɛnni yelen tɛ. Riging baarakɛlaw bɛ baara kɛ n’a ye ka kɛ wulicogo ye min bɛ kɛ tuma bɛɛ. Sling bɛ dɛsɛ. A doni bɛ jigin. Sɛgɛsɛgɛli in y’a sababu jira : kɔnɔna tiɲɛni min tun tɛ ye sani baara ka kɛ sɛgɛsɛgɛli kɛtuma na.

O ko in bɛ kɛ atelierw ni jɔli yɔrɔw la san o san. Ka kɛɲɛ ni Industriw ka kunnafoniw ye, sɛgɛnlafiɲɛbɔlan dɛsɛ kɛmɛsarada la caman bɛ kɛ sɛgɛnlafiɲɛbɔlanw na minnu tun bɛ i n’a fɔ u bɛ se ka baara kɛ ni ɲɛkisɛw ye  . Baarakɛlaw ka lakana ni kɛnɛyako ɲɛmɔgɔso (OSHA)  b’a sinsin a kan ko sɔgɔlan tiɲɛnenw ka kan ka bɔ baara la, nka ɲininkali jɔnjɔn ye nin ye: i b’a dɔn cogo di ni tiɲɛni ka jugu fo ka se ka sɔgɔlan bila lafiɲɛbɔ la?

 

Lishenflex  bɛ ka fɛnw kɔrɔtalanw dilan minnu dilannen don kabini san tan fila ni kɔ, wa an ka foro kunnafoniw b’a jira ko rigger caman bɛ kɛlɛ kɛ walasa ka danfara don ɲɛgɛnw doncogo ni tiɲɛni cɛ min bɛ lakana tiɲɛ. Nin gafe in bɛ ɲɛfɔli yelen di tiɲɛni suguya minnu ka ca kosɛbɛ ani lakɔlibila sariya kɛrɛnkɛrɛnnenw kan minnu ɲɛfɔlen don ASME B30.9 ani OSHA sariyaw fɛ.

 

Tigɛw ni ɲɛjibɔ

Tigɛ ni ɲɛjibɔ ye tiɲɛni suguya dɔw ye minnu ka teli ka kɛ ani minnu bɛ ye. Nka, tigɛ bɛɛ tɛ lafiɲɛbɔ teliya la—a juguya, a sigiyɔrɔ ani a juguya de b’a jira ni sɔgɔli ka kan ka tiɲɛ.

 

Lakɔlibila sariyaw tigɛcogo

 

Ka kɛɲɛ ni ASME B30.9 ye , sɔgɔlilan ka kan ka bɔ baara la ni:

 

• Tigɛw, ɲɛjibɔ walima sɔgɔsɔgɔninjɛ minnu bɛ jiribolo kolomaw bɔ kɛnɛ kan —ni kɛnɛma lakanani yɔrɔ tiɲɛna, doni ta fiɲɛw bɛ se ka tiɲɛ

• Dingɛw walima ɲɛji minnu bɛ kɛ jirisunba la minnu bɛ don a janya bɛɛ la

• Tigɛ fɛn o fɛn bɛ dɔ bɔ webbing bonya la ni hakɛba ye

 

Ka kɛɲɛ ni OSHA ka laadilikan ye min bɛ tali kɛ sɔgɔsɔgɔninjɛ la min tɛ mɔgɔ tɔɔrɔ, dingɛw, ɲɛjibɔ, tigɛ, sɔgɔli, walima sɔgɔsɔgɔninjɛ  bɛ sɛbɛn cogoyaw cɛ minnu bɛ a ɲini ka bɔ baara la joona . Kanada ka baarakɛyɔrɔ kɛnɛyako ni lakana baarada (CCOHS) y’a fɔ fana ko tigɛ, ɲɛjibɔ, sɔgɔsɔgɔninjɛ walima dingɛ minnu bɛ sɔgɔlan farikolo la, olu ye tiɲɛni taamasiɲɛ yetaw ye minnu ka kan ka bɔ.

 

Yɛlɛmacogo ɲɛnama:

 

• Yɔrɔ tigɛlen misɛnninw —sanfɛla fiyɛw dɔrɔn de bɛ nɔ bila; bɛ se ka sɔn ni koori si ma bɔ kɛnɛ kan

• Tigɛ juguman —a bɛ don ply layers caman fɛ walima ka core fibres bɔ kɛnɛ kan

• Dakun tigɛ —tigɛ min bɛ dɔ bɔ jirisunba bonya nafama na da la

 

Kɔlɔsili kɔrɔlen:  Hali ni da tigɛra 10%, o bɛ se ka dɔ bɔ sɔgɔli seko la ni 35% ye . O de y’a to ASME B30.9 bɛ bɔli wajibiya ni tigɛ o tigɛ bɛ sɔgɔsɔgɔninjɛ bonya walima a jɔcogo tiɲɛ kosɛbɛ.

 

Abrasion ni Wear (Sɛgɛsɛgɛli ni Wear).

Abrasion bɛ kɛ ni sɔgɔsɔgɔninjɛw bɛ sama ka tɛmɛ yɔrɔ gɛlɛnw kan, ka sama ka tɛmɛ yɔrɔ fitininw fɛ, walima ni u bɛ kɛ ni nkɔni lakanabagaw tɛ doni nɔgɔlenw kan. A tɛ i n’a fɔ tigɛw, a ka ca a la, sɔgɔsɔgɔninjɛ bɛ kɛ dɔɔni dɔɔni, wa a bɛ se ka ye ka ban.

 

Lakɔlibila sariyaw ka ɲɛsin Abrasion ma

 

ASME B30.9 , sɔgɔsɔgɔninjɛ ka kan ka bɔ baara la ni:

 

• Sɛgɛn min bɛ sɔgɔ kojugu, o bɛ yen—fini min bɛ jiribolo kolomaw bɔ kɛnɛ kan walima min bɛ dɔ bɔ sɔgɔsɔgɔninjɛ tigɛcogo la kosɛbɛ

• Surface abrasion ye sɛgɛn ka tɛmɛ kɛnɛma webbing fɛ ka taa doni-ta-yɔrɔ la

• Sɛgɛsɛgɛli min bɛ kɛ yɔrɔ kelen na —sɔgɔli yɔrɔ kelen na, o farati ka bon ka tɛmɛ finimugu kan min bɛ kɛ yɔrɔ kelen na

 

EN 1492-1  b’a jira ko sɔgɔsɔgɔninjɛ flakɛlenw ka kan ka bɔ ni sɔgɔsɔgɔninjɛ sɔgɔli ye jirisun tiɲɛ fo ka se yɔrɔ la, a bonya fɔlɔ bɛ dɔgɔya walima ni fiɲɛw karilen don.

 

Yɛlɛmacogo ɲɛnama:

 

• Yeelen surface fuzzing —a bɛ kɛ cogo la ka bɔ baara la; sɔnni bɛ kɛ min na

• Dawolo tigɛlenw —a bɛ se ka sɔn ni u ka dɔgɔn, nka aw bɛ to ka u lajɛ

• Yɔrɔ minnu sɛgɛnnen don —kɔnɔna sɔgɔsɔgɔninjɛ walima kɔnɔna jiriw bɛ bɔ kɛnɛ kan; ka kan ka kɛ lafiɲɛbɔ la

• Fibre mugulen bɛ jiriw ni ɲɔgɔn cɛ —o b’a jira ko sɔgɔsɔgɔninjɛ bɛ taa ɲɛ

 

Lishenflex ka laboratuwari kunnafoniw b’a jira ko sɔgɔsɔgɔninjɛ minnu bɛ kɛ ni nkɔni lakanabagaw tɛ, olu bɛ se ka bɔnɛ u fanga la fo ka se 50% ma wuli kelen kɔnɔ ka da sɔgɔsɔgɔninjɛ caman kan ɲɔgɔn sɔrɔyɔrɔ la. Nkɔni lakanabagaw tɛ fɛn ye min bɛ se ka kɛ i yɛrɛ sago la —u nafa ka bon walasa sɔgɔli ka mɛn.

 

Jeninida ni tiɲɛni minnu bɛ kɛ ni kemikɛli ye

Fɛnɲɛnamafagalanw tiɲɛni bɛ se ka kɛ sɔgɔsɔgɔninjɛ tiɲɛni suguya dɔ ye min farati ka bon kosɛbɛ barisa a ka ca a la a tɛ ye, wa a bɛ se ka nɔ bila sɔgɔlilan tigɛyɔrɔ bɛɛ la waati kelen na.

 

Lakɔlibila sariyaw ka ɲɛsin kemikɛli tiɲɛni ma

 

CCOHS ka fɔ la, nilon sɔgɔlanw bɛ tiɲɛ asidi fɛ, ka sɔrɔ poliyesitɛri sɔgɔlanw bɛ tiɲɛ alkali fɛ . Ni kemikaliya tiɲɛni kɛra, fiɲɛ jɔcogo bɛ tiɲɛ, tuma caman na, a yɔrɔ jiracogo tɛ ye.

 

ASME B30.9 , sɔgɔsɔgɔninjɛ ka kan ka bɔ baara la ni:

 

• Asidi walima jeninida sɔgɔlenw bɛ yen

• Kulɛri jiginni min b’a jira ko furakisɛw tali

• Yɔrɔ minnu bɛ sɔgɔsɔgɔ walima minnu ka gɛlɛn minnu bɛ fiɲɛ tiɲɛni jira

 

Liftex Slings lakanani gafe bɛ lasɔmi ko ni sɔgɔlifɛn dɔ bɛ asidi walima fɛnɲɛnamafagalanw na ani ni a fiyɛri tiɲɛna, sɔgɔsɔgɔninjɛ bɛ gɛlɛya ani ka kari, o bɛ na ni sɔgɔsɔgɔninjɛ kulɛri ye min bɛ kɛ bulama walima nɛrɛma ye O sɔgɔsɔgɔninjɛw ka kan ka bɔ baara la joona.

 

Yɛlɛmacogo ɲɛnama:

• Stiff or brittle feel —tiɲɛni minnu bɛ kɛ kemikɛli fɛ, olu bɛ fiɲɛw kɛ fɛn gɛlɛnw ye

• Kulɛri (kulu bulama, nɛrɛmuguma walima kulɛri min tɛ deli ka kɛ) —a ka ca a la a bɛ kɛ yɔrɔ dɔw la walima a bɛ kɛ yɔrɔw la minnu bɛ a jira

• Surface flaking walima peeling —o b’a jira ko a tiɲɛna ka taa a fɛ

• Yɔrɔ minnu tɛ sɛgɛn, olu gɛlɛyali ɲɛfɔbali

Funteni tiɲɛni ani Weld Splatter

Funteni tiɲɛni farati ka bon kɛrɛnkɛrɛnnenya la barisa a bɛ se ka sɔgɔsɔgɔninjɛ fanga dɔgɔya k’a sɔrɔ fɛn ma yeli kɛ a yɔrɔ la fo ka se a fiyɛw kari.

 

Lafiɲɛbɔ sariyaw ka ɲɛsin funteni tiɲɛni ma

 

Ka kɛɲɛ ni ASME B30.9 ani OSHA ye, sɔgɔli ka kan ka bɔ baara la ni:

 

• Funteni tiɲɛni daliluw —a bɛ wuli, a bɛ jeni, walima a bɛ kurukuru

• Weld splatter min ye fuse ka kɛ webbing ye

• Yɔrɔ minnu bɛ sɔgɔsɔgɔ walima minnu ka gɛlɛn minnu bɛ funteni tiɲɛni jira

 

CCOHS b’a fɔ ko funteni min ka ca ni 90°C (194°F) ye poliyesitɛri ni nilon na ani ka tɛmɛ 80°C kan poliporopilini na, o bɛ se ka tiɲɛni banbali lase mɔgɔ ma . OSHA bɛ kɛrɛnkɛrɛnnenya la, fɛn min bɛ wuli, ka a sɔgɔ, walima ka sɔgɔli kɛ sɔgɔsɔgɔninjɛ yɔrɔ o yɔrɔ la, o fɔ ka kɛ sababu ye ka a bɔ baara la joona.

 

Yɛlɛmacogo ɲɛnama:

 

• Fiyɛri minnu wulilen don walima minnu faralen don ɲɔgɔn kan —a bɛ kɛ i n’a fɔ sɔgɔlilan ɲɛda bɛ kɛ ni galasi ye walima a wulilen don

• Charring walima blackening —ka bɔ tasuma tilennen na walima weld splatter fɛ

• Blistering —bubbles walima bubbles bɛ sɔgɔsɔgɔninjɛ sanfɛ

• A gɛlɛyali ni a ma sɔgɔ —ni funteni bɛ a wulicogo duguma, o bɛ se ka kɛ sababu ye ka tiɲɛni kɛ hali bi

 

UV Tiɲɛni ni Fading

Tuma caman na, kulɛriw bɔli ye UV tiɲɛni taamasiɲɛ fɔlɔ yelen ye—wa o ye taamasyɛn ye min b’a jira ko n’a sɔrɔla sɔgɔli fanga bɔnɛna a la kaban.

Lakɔlibila sariyaw ka ɲɛsin UV tiɲɛni ma

 

ASME B30.9 ani WAC 296-155-55825 , sɔgɔlilan ka kan ka bɔ baara la ni:

 

• Kulɛri min jɛman don walima min ma ɲɛ, o bɛ yen

• Dɔ farala sɔgɔlifɛnw ka gɛlɛya kan

• Surface abrasion yɔrɔw la minnu tɛ ɲɔgɔn sɔrɔ doni na

• Yɔrɔ minnu bɛ sɔgɔsɔgɔ walima minnu ka gɛlɛn minnu bɛ fiɲɛ tiɲɛni jira

 

Rigging Institute bɛ lasɔmi ko sɔgɔlan bulama minnu bɛ ni jakite kulɛri jɛman ye, olu bɛ se ka bɔnɛ u fanga laban na fo ka se kɛmɛsarada la 40 ma kalo wɔɔrɔ kɔnɔ ni u bɛ to ka UV kɛ . Liftex ka gafe kɔnɔ, UV tiɲɛni bɛ se ka nɔ bila sintetiki webbing fanga la cogo caman na, k’a ta tiɲɛni dɔɔnin na ka se tiɲɛni bɛɛ ma.

 

Yɛlɛmacogo ɲɛnama:

 

• Kulɛri faded —sling tɛ a kulɛri fɔlɔ la (a ka c’a la, a bɛ kɛ i n’a fɔ a jɛlen don walima a finman don) .

• Stiff or brittle feel —UV ye fiɲɛ minnu tiɲɛ, olu bɛ kɛ fɛn gɛlɛnw ye

• Surface cracking or checking —farikolo finmanw bɛ sɔgɔsɔgɔninjɛ sanfɛla la

 

Stitching ani Splice Tiɲɛni

Sɔgɔli ye sɔgɔlifɛn ye min bɛ degun kosɛbɛ. Doni talanw ni ɲɛw bɛ doni dafalen ta, wa a ka c’a la, sɔgɔli tiɲɛni de ye dɛsɛ surunya jiralan fɔlɔ ye.

 

Lakɔlibila sariyaw ka ɲɛsin Stitching Damage ma

 

ASME B30.9 , sɔgɔsɔgɔninjɛ ka kan ka bɔ baara la ni:

 

• Sɔgɔli karilen walima sɛgɛnnen doni-ta-minɛnw kɔnɔ

• Stitching pull-out —stitching bɛ ka faran ka bɔ webbing la

• Ka kari walima ka sɛgɛn kosɛbɛ doni ta yɔrɔw la

 

EN 1492-1 b’a jira ko sɔgɔli ka kan ka sɛgɛsɛgɛ ni ɲɛ ye ni a tiɲɛna, wa a man kan ka kɛ ni sɔgɔli karilen ye doni ta yɔrɔw la.

 

Yɛlɛmacogo ɲɛnama:

 

• Sɔgɔsɔgɔninjɛ karilenw —jiri karilen kelen walima caman bɛ ɲɛ walima sɔgɔsɔgɔninjɛ yɔrɔ la

• Sɔgɔli min donna —o sɔgɔlen in sɔgɔra ani a bɛ i n’a fɔ a ka fin walima a sɛgɛnnen don

• Stitching pull-out —stitching bɛ ka faran ka bɔ sling farikolo la

• Ni fɛnw tigɛcogo tɛ kelen ye walima minnu tigɛlen don —o bɛ se k’a jira ko u doni ka ca kojugu walima ko u ma dila cogo bɛnbali la

 

Kuma surun ni Ladilikan nafamaw

K’a dɔn waati min na i ka kan ka wulilan kɔrɔta, o nafa ka bon baarakɛyɔrɔ lakanani na. Sariyakolo jɔnjɔn: ni siga bɛ i la, i k’a tiɲɛ.

 

Lakɔlibila teliya la sɛgɛsɛgɛli sɛbɛn:

 

Waleya nafama minnu ka kan ka waleya:

 

1. Aw bɛ sɛgɛsɛgɛliw kɛ sani aw ka baara kɛ ni a ye—sanni aw ka wuli bɛɛ, aw bɛ a lajɛ ni tiɲɛni yelenw tɛ

2. Sɛbɛnw sɛgɛsɛgɛli sɔrɔlenw—sɛbɛnw mara ka kɛɲɛ ni ASME B30.9 ka sariyaw ye

3. Aw bɛ sɔgɔsɔgɔninjɛ tiɲɛnenw bɔ joona—aw kana sɔgɔlan 'mara' abada walasa ka a fili kɔfɛ

4. Aw bɛ sɛgɛnlafiɲɛbɔlanw tiɲɛ—aw bɛ u tigɛ walima k’u tiɲɛ walasa aw kana baara kɛ kokura bala la

5. Aw ye aw ka kulu dege—aw k’a lajɛ ko riggerw bɛɛ bɛ se ka tiɲɛni suguyaw ni lakɔlibila sariyaw dɔn

 

Lishenflex  bɛ poliyesitɛri kɔrɔtalanw dilan ka kɛɲɛ ni EN 1492-1 ani ASME B30.9 sariyaw ye, ni seko taamasiyɛn jɛlenw ye minnu kulɛri kofɔlen don ani sɛgɛsɛgɛli kalan dɛmɛ. An b’an sinsin a kan ko sɛgɛsɛgɛli kɛli tuma bɛɛ ani lafiɲɛbɔ waati bɛnnen na, o ye fɛnw kɔrɔtacogo lakanani jusigilan ye.

 

Ni aw mago bɛ dɛmɛ na walasa ka sling sɛgɛsɛgɛli ni lakɔlibila porogaramu sigi sen kan — walima ni aw mago bɛ dɛmɛ na walasa ka tiɲɛni suguyaw dɔn aw ka sisan fɛnmarayɔrɔ la — aw bɛ se ka bataki ci o ma sales@lishenflex.com , ani an ka fɛɛrɛbɔ jɛkulu bɛna dɛmɛ di mɔgɔ kelen-kelen bɛɛ ma.