Views: 0 Author: Site Editor Publish Time: 2026-11-10 Origin: Site
A rigger selects a polyester round sling for a 2-tonne lift. The sleeve is green. The label is blue and sewn into the sling. But when the sling is examined closely, the label shows a WLL of 2 tonnes for straight pull—and only 1.6 tonnes for a choke hitch. The color said “2 tonnes,” but the hitch configuration changes the safe load.
This is why reading a round sling correctly requires more than glancing at the color. Lishenflex has been manufacturing polyester round slings for decades, and our field experience shows that misreading WLL markings is a recurring cause of overload incidents. The color code is a quick reference—the label is the authority.
The European standard EN 1492-2 assigns a specific color to each Working Load Limit for round slings. The system is standardized across manufacturers, allowing riggers to identify capacity at a glance .
Color | Working Load Limit (WLL) |
|---|---|
Purple | 1 tonne |
Green | 2 tonnes |
Yellow | 3 tonnes |
Grey | 4 tonnes |
Red | 5 tonnes |
Brown | 6 tonnes |
Blue | 8 tonnes |
Orange | 10 tonnes and above |
Source: EN 1492-2; Mennens
Critical limitation: The color code indicates the straight-pull WLL only. It does not reflect the reduced capacity in a choke hitch or the increased capacity in a basket hitch. A green sling is “2 tonnes” only when used in a vertical, straight lift.
On a polyester round sling, the color is applied to the protective sleeve that covers the load-bearing core. The sleeve is not load-bearing—it protects the core from abrasion and UV exposure. Because the color is on the sleeve, it remains visible during normal use, even when the sling is dirty or wet.
According to EN 1492-2, every polyester round sling must carry a durable blue sewn-in label containing the statutory information . The visible section of the label includes:
Manufacturer identification
Year of manufacture
Material (Polyester / PES)
Effective Working Length (EWL)
Serial number or batch number
Applicable European standard (EN 1492-2)
Maximum Working Load Limit (WLL) for straight pull
A portion of the label is sewn into the overlap of the sling for traceability, even if the visible portion becomes damaged or illegible .
The reverse side of the label—or an additional section—specifies the permitted WLL for different slinging configurations . This is where the label overrides the color code.
For a green (2-tonne) round sling, the label typically shows:
Hitch Configuration | WLL |
|---|---|
Straight pull | 2.0 tonnes |
Choke hitch | 1.6 tonnes (0.8 factor) |
Basket hitch (0°–45°) | 2.8 tonnes (1.4 factor) |
Basket hitch (45°–60°) | 2.0 tonnes (1.0 factor) |
Source: EN 1492-2 capacity factors; CERTEX Germany
The label is the legal authority. If the color says green but the label shows a choke WLL of 1.6 tonnes, the sling must not be used to lift 2 tonnes in a choke hitch.
Modern blue labels often include an inspection calendar where the next inspection date can be marked or punched, and a QR code linking to multilingual user manuals . These features support compliance with periodic inspection requirements.
Many polyester round slings have continuous black stripes woven into the sleeve material. Each stripe represents 1 tonne of WLL . A 3-tonne sling has three stripes; a 5-tonne sling has five.
This marking is not required by EN 1492, but it is widely recognized in the lifting industry as a supplementary identification method .
Slings with a WLL of 12 tonnes and above do not use black stripes . For these high-capacity slings, the color code (orange) and the blue label are the only reliable identification methods.
Practical use: Black stripes are a quick field check. If a rigger suspects the sleeve color has faded or been replaced, counting the stripes provides a second data point. But the label remains the final authority.
If the sleeve color and the label WLL do not match, the label governs. A sleeve may have been replaced, or the sling may have been re-sleeved with the wrong color during repair. In either case, the sling’s legal identity is defined by its sewn-in blue label.
Action: Remove the sling from service and verify its identity with the manufacturer using the serial number. Do not use a sling with conflicting markings.
A round sling without a legible blue label cannot legally be used. EN 1492-2 requires the label, and inspection standards treat a missing or illegible label as a removal criterion.
Lishenflex’s field data confirm that slings with damaged or missing labels are frequently involved in capacity-related incidents. The label is not optional—it is the sling’s proof of compliance.
Reading a polyester round sling correctly requires three checks: the color for a quick reference, the blue label for legal WLL and hitch-specific capacities, and the black stripes for a supplementary visual check.
Key takeaways:
Color = straight-pull WLL only—purple (1t) through orange (10t+)
Blue label = legal authority—includes WLL for choke, basket, and straight pull
Black stripes = 1 tonne each—a supplementary check, not required by EN 1492
Label overrides color—if they conflict, the label governs
No legible label = no use—missing or damaged labels require removal from service
Lishenflex manufactures polyester round slings to EN 1492-2 standards, with color-coded sleeves, blue sewn-in labels, and black stripe markings for quick identification. Our labels include WLL for all hitch configurations, serial numbers for traceability, and inspection calendars to support your safety program.
If you need assistance verifying the capacity markings on your round sling inventory—or need help establishing a color-code and label inspection protocol for your facility—please send an email to sales@lishenflex.com, and our technical team will provide one-on-one support.