Lifting Belt Maintenance Guide: Dzadzɛnyenye, Nudzraɖoƒe, Kple Subɔsubɔdɔ ƒe Agbenɔƒe Kekeɖenudɔ

A alidziblanu si wotsɔna kɔa nu doa kpo nu le ʋu kɔkɔ si wowɔna edziedzi me. Agba la dzi ɖena kpɔtɔna. Numekukua meɖe nusi gbɔ wòtso si dze ƒã fia o—wometsoe o, womevuvu wo o, womegblẽ nu le wo ŋu si woate ŋu akpɔ o. Ðeko aŋea do go.

 

Nɔnɔme sia dzɔna zi geɖe wu alesi rigging ŋuti nunyala akpa gãtɔ adi be yewoalɔ̃ ɖe edzi. Eye le go geɖe me la, menye adzɔnuwo wɔwɔ ƒe gbɔdzɔgbɔdzɔ alo agba si gbɔ emee nye nusi gbɔ wòtso o. Enye aɖabaŋeŋe ƒu edzi —dzadzraɖo madzemadzee, nudzraɖoƒe nyuie o, alo kpododonu le nusiwo gblẽna vivivi kpɔkpɔ dze sii.

 

Dongfang Lishen  le nuwo kɔklɔ ƒe alidziblanu wɔm ƒe blaeve kple edzivɔe nye sia, eye míaƒe agbledzinyatakakawo ɖee fia be beléle nyuie ate ŋu ana sling ƒe dɔwɔwɔ ƒe agbenɔƒe nadidi ɖe edzi 300% alo esi wu nenema. Le go bubu me la, aŋekotoku siwo wodzra ɖo vodadatɔe alo wotsɔ atike sesẽwo kɔ wo ŋu la ate ŋu abu woƒe ŋusẽ si woɖo ɖi ƒe 50% le ɣleti aɖewo me. Sling siwo ƒe nɔnɔme kple dzeside ɖeka gɔ̃ hã ate ŋu ƒe agbenɔƒe ato vovo kura le alesi nuwuwu zãlawo léa be na woe nu. Mɔfiame sia na beléle na ɖoɖo nyui aɖe si wotu ɖe dzidzenuwo dzi be wòakpɔ wò gadede asi kple wò ƒuƒoƒoa ta.

 

Dzadzɛnyenye—Nusi Wɔa Dɔ Kple Nusiwo Gblẽa Nu

 

To vovo na alesi ame geɖe xɔe se la, alidziblanu kɔklɔ menye dɔwɔwɔ si sɔ na amesiame o. Nusi wotsɔ wɔe le vevie—eye atike si wotsɔna klɔa nu ŋu hã le vevie.

 

Polyester Kple Nylon—Nya Wò Dzɔdzɔmeŋusẽŋununya

 

Atike vovovowoe le aŋenu eve siwo wotsɔ lãgbalẽ wɔe siwo bɔ wu la ŋu, eye atike si mesɔ o zazã ate ŋu agblẽ nu kabakaba:

 

 

Dzadzɛnyenye ƒe Mɔnu Si Wokafu

 

Adzɔhawo ƒe nuwɔna nyuitɔwo kekeake le beléle edziedzi ŋu na ʋufɔti ƒe alidziblanu :

 

Le ezazã ɖesiaɖe megbe: Tsɔ avɔ xɔdzo tutue ɖe anyi be nàɖe ɖi siwo le anyigba dzi, ami, kple atike siwo susɔ la ɖa hafi woage ɖe kaawo me.

 

Dzadzɛnyenye goglo (ɣleti 3-6 ɖesiaɖe):  Klɔ asi le tsi fafɛ alo fafɛ (si nye 40°C si sɔ gbɔ wu) me to adzalẽ fafɛ zazã me. Woate ŋu azã brɔs falɛfalɛ atsɔ awɔ dɔ le adzalẽa me ɖe avɔa me.

 

Klɔklɔ: Klɔe nyuie be adzalẽ ƒe nugbagbevi siwo katã ate ŋu ahe ɖi alo atikewo awɔ dɔ kple kaawo le ɣeyiɣi aɖe megbe la ɖa.

 

Kuku: Ya ƒuna le dzɔdzɔme nu le teƒe si ya le nyuie le adzɔge tso ɣe ƒe keklẽ kple dzoxɔxɔ tẽ gbɔ. Mègazã nufamɔ̃, le dzodoƒe, alo le dzoxɔxɔnamɔ̃ dzi gbeɖe o—dzoxɔxɔ si wu 90°C (194°F) ate ŋu agblẽ nu le ka siwo wotsɔ lãgbalẽ wɔe ŋu tegbee.

 

Nusiwo wòle be woaƒo asa na:

 

● Klɔnu sesẽwo, bleach, alo solvents—esiawo gblẽa ka ƒe wɔwɔme me

 

● Klɔmɔ̃ siwo ƒe nyaƒoɖeamenu sesẽ—ŋusẽ ate ŋu ana ɖinuwo nage ɖe avɔa me ayi goglo wu

 

● Ne eƒu le ɣe ƒe keklẽ tẽ me—UV keklẽ nana polyester kple nylon gblẽna

 

Nudzraɖoƒe—Afisi Wodzraa Alidziblanu Siwo Wotsɔ Klɔa Nu Le Kple Alesi Wodzrae ɖo

 

Woate ŋu aʋli nya be nudzraɖoƒe nyuiee nye nusi dzi woŋea aɖaba ƒuna wu le ʋufɔti ƒe alidziblanu dzi kpɔkpɔ me. Aŋe si le dzadzɛ bliboe gake wodzrae ɖo nyuie o ate ŋu agblẽ kabakaba wu esi wozãna gbesiagbe gake wodzrae ɖo nyuie.

 

Futɔ Etɔ̃awo—UV, Tsi, Kple Dzoxɔxɔ

 

Adzɔhawo ƒe dzidzenuwo kple dedienɔnɔdzikpɔlawo dea dzesi nudzraɖoƒe ƒe afɔku vevi etɔ̃ ɣesiaɣi:

 

Nudzraɖoƒe ƒe Nɔnɔme Nyuitɔ Kekeake

 

Wotue ɖe Dongfang Lishen ƒe aɖaŋuɖoɖowo kple dɔwɔƒea ƒe dzidzenuwo dzi:

 

Teƒea: Teƒe si fa miamiamia, si me tsi mele o, eye ya nyui gena ɖe eme. Ƒo asa na anyigbaxɔdzowo alo teƒe siwo tsi ate ŋu adze bɔbɔe.

 

Ðoƒe: Dzrae ɖo ɖe agbalẽdzraɖoƒewo gbadzaa alo nàhee ɖe agbawo dzi. Mègabla  nu kɔkɔ ƒe alidziblanu gbeɖe le nyaƒoɖeamenu me o—eƒe fli siwo nɔa anyi ɖaa la hea teƒe siwo gbɔdzɔna vɛ. Kloe alo ƒoe ɖe ati ŋu be wòalé xɔa ƒe blibonyenye me ɖe asi.

 

Takpɔkpɔ: Te ɖa tso ɣe ƒe keklẽ tẽ, dzoxɔxɔ ƒe pɔmpiwo, dzo si le ʋuʋu ɖi, welding splatter, kple atikewo ƒe dzudzɔ gbɔ.

 

Kaka ɖe anyigba dzi: Mègadzrae ɖo ɖe anyigba tẽ gbeɖe o, afisi tsi, ami, alo nudzodzoeviwo ate ŋu agblẽ nu le. Zã pallet alo racks.

 

Nya vevi aɖe: Ele be woatsɔ ya aƒu gbe ɖe aŋetu siwo tsi le wo zazã alo wo ŋu kɔklɔ me la keŋkeŋ hafi woadzra wo ɖo. Alidziblanu si me tsi le si wotsɔ kɔa nu dzi dzadzraɖo kpea aŋɔ ƒe tsitsi kple ka ƒe gbegblẽ.

 

Dzodzro—Nu Siwo Gblẽ Ɣaɣla De dzesi Hafi Woado Do kpo Nu

 

Dzadzɛnyenye kple nudzraɖoƒe nye mɔxexe ɖe enu—gake ŋkuléle ɖe eŋu edziedzie nye ametakpɔnu mamlɛtɔ. Dzidzenuwo abe ASME B30.9 kple EN 1492 de se be woalé ŋku ɖe nu ŋu, gake biabia ŋutɔŋutɔe nye be: nuka dim nèle?

 

Nukpɔkpɔ Me Dzodzro—Nusi Nàte Ŋu Akpɔ

 

Le CCOHS kple MSU ƒe mɔfiamewo nu la, ɖe akɔtaɖonu aɖe ɖa le dɔwɔwɔ me enumake ne ède dzesii be:

 

Lãɖeɖe, aɖatsi, ʋuʋudedi, alo do le webbing la me

 

Nusiwo wotsɔ blaa nu siwo gbã alo esiwo vuvu—vevietɔ le agbatsɔkeke siwo wotsɔ blaa nu ŋu

 

Abrasive wear si gbɔ eme (vuvu si ɖoa kekeme gbãtɔ ƒe 1/10 nye nusi bɔ be woatsɔ aƒu gbe) .

 

Amadede si wotsɔ bleached alo faded —esia fia be UV gblẽ ('bleached sling' nye kpododonu le eɖokui si le MSU ƒe dzidzenuwo nu)

 

Teƒe siwo wofa, wotɔ dzoe, alo esiwo ŋu weld-splatter gblẽ le

 

Nusi wotsɔ ƒoa aŋenua ƒe sesẽme dzina ɖe edzi—zi geɖe la, enyea dzoxɔxɔ alo atike siwo gblẽa nu le ame ŋu ƒe dzesi

 

Webbing si wogbã alo nusiwo wotsɔ de eme

 

Dzesidegbalẽvi si bu alo esi womate ŋu axlẽ o

 

Tactile Inspection—Nusi Nàte Ŋu Ase

 

Nukpɔkpɔ ƒe ŋkuléle ɖe nu ŋu ɖeɖe mesɔ gbɔ o. Le aŋetu siwo wowɔ, vevietɔ aŋe goglowo gome la, zi geɖe la, ne woka asi eŋu ko hafi woate ŋu ade dzesi nusiwo gblẽ le ememe:

 

Bli aŋea  ɖe eƒe didime nu eye nàɖo to gbeɖiɖi siwo le ɖiɖim—eme ka siwo gbã

 

Mia webbing la ɖe  asibidɛ gã kple asibidɛ sue dome; seselelãme fafɛ alo esi mewɔ ɖeka o fia be ememe gblẽ

 

Se le ɖokuiwò me be yekpɔ ƒunukpeƒetetedɔ siwo womeɖe o —le aŋe goglowo me la, ƒu sesẽ si lolo abe pea ene ate ŋu anye dutanu, gake ne woƒo ƒu gã sesẽ si didi ŋutɔ la,  ate ŋu afia be nu vevi aɖe do kpo nu

 

Dzɔdzɔmenuwo Dzraɖoƒe Enuenu—Zi Zi Nenie?

 

 

Ele be woalé ŋku ɖe aŋetu siwo le dɔ wɔm vevie (dzoxɔxɔ gã, atikewo, agba kpekpewo) ŋu enuenu— be woalé ŋku ɖe wo ŋu le ɣleti etɔ̃ ɖesiaɖe me na nuto siwo me wobiaa nu geɖe le. wokafui

 

 

Subɔsubɔdɔ ƒe Agbenɔƒe Didi—Ɣeyiɣi didi Kae Wòle Be Akɔtaɖonu Nanɔ anyi?

 

Alidziblanu aɖeke si wotsɔ kɔa nu  menɔa anyi tegbee o—gake beléle nyuie nana eƒe agbenɔƒe didi ɖe edzi ŋutɔ.

 

Subɔsubɔdɔ Ŋuti Nuŋlɔɖi Siwo Woŋlɔ Ðo

 

Dongfang Lishen  kafui be woaɖo alesi woazã nudzraɖoƒe na aŋe ɖesiaɖe. Nuŋlɔɖi si ŋu wodzra ɖo nyuie la dometɔ aɖewoe nye:

 

Ɣletiŋkeke si dzi wozãe zi gbãtɔ kple esi wotsɔe de dɔwɔwɔ me

 

Kɔkɔ ƒe xexlẽme kple agba ƒe lolome na dɔwɔwɔ ɖesiaɖe

 

Hitch ƒomevi siwo wozãna (tsitrenu, choked, basket, kple bubuawo) .

 

Nutome ƒe nɔnɔme siwo wodo goe (dzoxɔxɔ ƒe dzidziɖedzi, atikewo ƒe agbɔsɔsɔ, UV) .

 

Dzodzroa me tsonuawo katã—ŋkeke, ŋkutsala, nusiwo ŋu woke ɖo, kple afɔɖeɖe siwo wowɔ

 

Nyatakaka sia na be woate ŋu aɖɔli nyagblɔɖi : dzudzɔxɔxɔledɔme slings hafi woaɖo kpododonu vevi aɖe, ke menye le ema megbe o.

 

Dzudzɔxɔxɔledɔme ƒe Dzesiwo—Ɣekaɣie Woaɖee

 

Le dɔwɔƒea ƒe dzidzenuwo kple adzɔnuwo wɔlawo ƒe aɖaŋuɖoɖowo nu la, ɖe alidziblanu si wotsɔ kɔa nu la ɖa enumake ne:

 

Dodo ɖoa kekeme gbãtɔa ƒe 1/10

 

Lãɖeɖe siwo woate ŋu akpɔ, ʋuʋudedi sesẽ, alo ʋuʋudedi le teƒe ɖeka le aŋea ƒe ŋutilã me

 

Stitching pull-out, gbagbã, alo vuvu vevie le agbatsɔlawo ƒe ʋuƒoawo ŋu

 

Atikewo ƒe dzobibi, acid/alkali ƒe gbegblẽ, alo dzoxɔxɔ ƒe gbegblẽ (melting/charring) .

 

Aŋɔ, aŋɔ, alo gbegblẽ

 

UV ƒe nugbegblẽ si woɖena fiana to bleaching, yellowing, alo surface peeling me

 

Trɔtrɔ, eƒe nɔnɔmetɔtrɔ, alo fuɖename sesẽ

 

Ga siwo wotsɔ blaa nu la ɖea xɔxlɔ̃, tɔtɔ, alo gbagbã fiana

 

Nuxlɔ̃ame ƒe aŋe dzĩwo dzena—si fia be wotsɔ agba si wotsɔ bla aŋea wògbɔ eme

 

Gɔmeɖose vevitɔ: ne ɖikeke le ŋuwò la, tsɔe ƒu gbe. Alidziblanu si woatsɔ aɖɔli agba si wotsɔ kɔa nu la ƒe asi mede agba si ge, abixɔxɔ, alo amewuwu nu kura o.

 

Kpuie Kpuie Kple Nusiwo Woate Ŋu Atsɔ Atsɔ Awɔe

 

Alidziblanu si wotsɔ kɔa nu nye nusi ŋu wotrɔ asi le, ke menye adzɔnu o. Beléle nɛ nyuie—ekɔklɔ, edzraɖo, kple edzikpɔkpɔ—kpɔa ŋusẽ ɖe eƒe ŋusẽ, kakaɖedzi, kple eƒe agbenɔƒe dzi tẽ. Menye aŋetu siwo woatsɔ aɖɔli woe koe wodzidzea ga si wogblẽna ɖe ɖekematsɔleme ŋu o, ke boŋ le dɔwɔnu siwo gblẽ, dɔa ƒe megbetsitsi, kple dedienɔnɔ si gblẽ me.

 

Nuwɔna atɔ̃ siwo woawɔ egbea:

 

Tia nudzraɖoƒe si me ƒu, UV-takpɔkpɔ le, eye dzoxɔxɔ si dzi woate ŋu akpɔ.

 

Ðo dzadzɛnyenye ŋuti ɖoɖo aɖe ɖe afima—adzalẽ fafɛ, tsi fafɛ, ya ɖeɖeko. Atike aɖeke mele eme o. Dzoxɔxɔ aɖeke meli o.

 

He wò ƒuƒoƒoa be woawɔ asikaka nu ŋu ƒe ŋkuléle ɖe nu ŋu, ke menye ŋkuléle ɖe nu ŋu ko o.

 

Wɔ sling ɖesiaɖe zazã ŋuti nuŋlɔɖi—track lift counts kple exposure conditions.

 

Wɔ dzudzɔxɔxɔledɔme ƒe ɖoɖo sesẽ aɖe—ne eƒe kekeme 1/10 vuvu alo dzesi ɖesiaɖe si fia be ememe gblẽ la, tsɔe ƒu gbe.

 

Dongfang Lishen  wɔa polyester kɔklɔ ƒe alidziblanu siwo ƒe ŋutete ƒe dzesi siwo me kɔ le amadede me, siwo wɔ ɖeka kple EN 1492 kple JB/T 8521 ƒe dzidzenuwo, eye wowɔ wo be woanɔ agbe didi ne wolé be na wo nyuie. Míaƒe nuawo li tso tɔn 1 va ɖo tɔn 10 ƒe ŋutete siwo woɖo ɖi, kple agbatsɔtsɔ ƒe lãgbalẽ kple webbing si wotsɔ polyester nu deŋgɔ siwo sɔ kple wo nɔewo be woaɖe afɔku siwo mesɔ o siwo gblẽa nu le wo ŋu la ɖa.

 

Ne èhiã beléle na wò ŋuti aɖaŋuɖoɖo siwo wowɔ ɖe ɖoɖo nu siwo sɔ ɖe wò dɔwɔwɔ ƒe nɔnɔme tɔxɛwo nu—eɖanye atike sesẽwo, dzoxɔxɔ si gbɔ eme, alo zazã zi geɖe o—taflatse ɖo e-mail ɖe sales@lishenflex.com , eye míaƒe dɔnyala ƒe ƒuƒoƒoa ana kpekpeɖeŋu ame ɖekaɖeka.