Gafe min bɛ cɛsirilan kɔrɔta: Saniya, a marali ani a baara ɲɛnamaya janya

KELEN kɔrɔta cɛsirilan bɛ dɛsɛ kɔrɔtacogo kɔrɔlen na. A doni bɛ jigin. Sɛgɛsɛgɛli ma sababu jɛlen si jira—tigɛ tɛ, sɔgɔsɔgɔ, tiɲɛni yelen tɛ. Sling in ye a yɛrɛ di dɔrɔn.

 

Nin ko in bɛ kɛ ka caya ka tɛmɛ rigging baarakɛlaw fanba b’a fɛ ka sɔn min ma. Wa a ka c’a la, a sababu ju tɛ fɛn dilanni nafama ye walima doni caya kojugu. O ye dɛsɛ ye —saniyacogo jugu, a maracogo jugu, walima a tiɲɛni dɔɔni dɔɔni dɔnbaliya.

 

Dongfang Lishen  bɛ ka cɛsirilanw dilan minnu dilannen don ni fɛnw ye kabini san tan fila ni kɔ, wa an ka foro kunnafoniw b’a jira ko ni ladonni ɲuman kɛra, o bɛ se ka sɛgɛnlafiɲɛbɔlan ka baara kɛta janya ni 300% ye walima ka tɛmɛ o kan. O kɔfɛ, sɔgɔsɔgɔninjɛ minnu maralen don cogo jugu la walima minnu saniyalen don ni kemikɛli gɛlɛnw ye, olu bɛ se ka bɔnɛ u fanga hakɛ la 50% kalo damadɔ kɔnɔ. Hali sɔgɔlilan minnu ka fɛnsɛbɛnni ni u tɔgɔ ye kelen ye, olu bɛ se ka kɛ ni baarakɛcogo ye min tɛ kelen ye kosɛbɛ ka kɛɲɛ n’u ladoncogo ye baarakɛla labanw fɛ. Nin gafe in bɛ ladonni kɛcogo ɲuman di, min sinsinnen bɛ sariyaw kan, walasa k’i ka wari bilalen n’i ka jɛkulu lakana.

 

Saniya—Min bɛ baara kɛ ani min bɛ tiɲɛni kɛ

 

A ni mɔgɔw b’a miiri cogo min na, cɛsirilan kɔrɔtalen saniya tɛ baara ye min bɛ kɛ ni bɛɛ ye. Fɛn min bɛ kɛ, o nafa ka bon—ani saniyalan fana nafa ka bon.

 

Poliyester ni Nylon—I ka chimie dɔn

 

Sintetiki fɛn fila minnu ka ca kosɛbɛ, olu ka kemikaliya gɛlɛya tɛ kelen ye, wa ni aw ye saniyalan jugu kɛ, o bɛ se ka tiɲɛni teliya:

 

 

Saniyacogo min bɛ fɔ

 

Industriw ka fɛɛrɛ ɲumanw ka ɲɛsin kɔrɔta cɛsirilan ladonni ma tuma bɛɛ:

 

Baara kelen-kelen bɛɛ kɔfɛ: Aw bɛ a ko duguma ni fini ɲiginnen ye walasa ka dugukolo sanfɛla nɔgɔ, tulu ani kemikɛli tolenw bɔ sani u ka don fiɲɛw kɔnɔ.

 

Saniya jugumanba (kalo 3-6 o kalo 3-6):  Aw bɛ aw bolo ko ji nɛnɛman walima jisuma na (a ka ca ni 40°C ye) ni safinɛ nɔgɔman ye. Burusi nɔgɔlen bɛ se ka kɛ ka safinɛ baara ka don finimugu la.

 

Koli : Aw bɛ a ko ka ɲɛ walasa ka safinɛ tolenw bɛɛ bɔ, o bɛ se ka nɔgɔ sama walima ka kɛ ni kemikɛli ye ni fiɲɛw ye waati kɔnɔ.

 

Jali: Aw bɛ fiɲɛ ja a yɛrɛ la yɔrɔ la, fiɲɛ bɛ don yɔrɔ min na, yɔrɔ min ka jan tile yeelen tilennen ni funteni sɔrɔyɔrɔw la. Aw kana baara kɛ ni jalen ye abada, tasuma kɛrɛfɛ, walima radiyatɛri kan—funteni min ka ca ni 90°C ye, o bɛ se ka fiɲɛ dilannenw tiɲɛ kudayi.

 

Aw ka kan ka aw yɛrɛ tanga fɛn minnu ma:

 

● Safinɛ gɛlɛnw, bleach walima solvents—o bɛ fibre structure tiɲɛ

 

● Kolikɛlan minnu bɛ tansiyɔnba la—fanga bɛ se ka nɔgɔw bila ka taa a fɛ ka don finimugu kɔnɔ ka taa a fɛ

 

● Ka ja tile yeelen tilennen na—UV fiɲɛ bɛ poliyesitɛri ni nilon tiɲɛ

 

A marali—Cɛsirilanw bɛ mara yɔrɔ min na ani cogo min na

 

Siga t’a la, a maracogo ɲuman ye fɛn ye min bɛ ye ka tɛmɛn fɛn bɛɛ kan, min bɛ kɛ ka ɲɛsin fɛnw kɔrɔta cɛsirilan ladonni ma. Sɔgɔlan min saniyalen don kosɛbɛ nka a maralen don cogo bɛnbali la, o bɛ se ka tiɲɛ joona ka tɛmɛ min bɛ kɛ don o don nka a maralen don ka ɲɛ.

 

Jugu saba—UV, ji ani funteni

 

Industriw ka sariyaw ni lakana ɲɛmɔgɔw bɛ to ka fɛnw marali bagabagali fɔlɔ saba jira:

 

Fɛn maracogo ɲumanw

 

Ka da Dongfang Lishen ka ladilikanw kan ani izini sariyaw kan:

 

Yɔrɔ: Yɔrɔ nɛnɛnen don, yɔrɔ min jalen don, fiɲɛ bɛ don a kɔnɔ kosɛbɛ. Aw bɛ aw yɛrɛ tanga dugujukɔrɔyɔrɔw ma walima yɔrɔw la minnu ka teli ka ji bɔ.

 

Yɔrɔ: Aw bɛ a mara ka ɲɛ etajɛriw kan walima ka a dulon fɛnw bilayɔrɔw kan. Aw kana  cɛsirilan kɔrɔtalen da abada ni degun ye—a kurukuruni banbaliw bɛ barika dɔgɔya. Aw bɛ a dulon walima ka a siri ka ɲɛ walasa ka a jɔcogo dafalen mara.

 

Lakanali: Aw bɛ aw yɔrɔ janya tile yeelen tilennen na, wajibɔlanw, tasuma dafalenw, welda sɔgɔsɔgɔninjɛw, ani kemikɛli sisiw.

 

Dugukolo magali : Aw kana a mara duguma abada k’a ɲɛsin duguma, yɔrɔ min na ji, tulu walima fɛnɲɛnamafagalanw bɛ se ka tiɲɛni kɛ. Aw bɛ baara kɛ ni palɛtiw walima fɛnw bilayɔrɔw ye.

 

Kɔlɔsili nafama: Sɔgɔlan minnu bɛ ɲigi baara kɛtuma na walima u saniya waati, olu ka kan ka ja pewu fiɲɛ fɛ sani u ka mara. Ni aw ye fɛnw kɔrɔta cɛsirilan ɲiginnen dɔ mara, o bɛ wele bila nɔgɔw falenni ni fiɲɛw tiɲɛni ma.

 

Sɛgɛsɛgɛli—Tiɲɛ dogolenw dɔnni sani a ka dɛsɛ

 

Saniya ni a marali ye bana kunbɛnni ye—nka sɛgɛsɛgɛli kɛli tuma bɛɛ, o ye lafasali laban ye. Sariya minnu bɛ i n’a fɔ ASME B30.9 ani EN 1492, olu bɛ sɛgɛsɛgɛliw yamaruya, nka ɲininkali lakika ye nin ye: i bɛ mun ɲini?

 

Sɛgɛsɛgɛli ɲɛnama—I bɛ se ka min ye

 

CCOHS ni MSU ka laadilikanw fɛ, aw bɛ cɛsirilan dɔ bɔ baara la joona ni aw ye a kɔlɔsi:

 

Tigɛw, ɲɛjibɔ, sɔgɔsɔgɔninjɛ walima dingɛw bɛ kɛ jirisunba la

 

Sɔgɔli karilen walima sɛgɛnnen—kɛrɛnkɛrɛnnenya la doni ta yɔrɔw la

 

Sɛgɛsɛgɛli tɛmɛnen (sɔgɔli min bɛ se a bonya fɔlɔ 1/10 ma, o ye sɔgɔli hakɛ ye min bɛ kɛ tuma caman na) .

 

Kulɛri min jɛlen don walima min ma ɲɛ —o b’a jira ko UV tiɲɛna ('sling bleached' ye dɛsɛ ye min bɛ kɛ otomatiki la ka kɛɲɛ ni MSU sariyaw ye)

 

Yɔrɔ minnu wulilen don, minnu jenilen don, walima minnu tiɲɛna ni weld-splatter ye

 

Dɔ farali sɔgɔlifɛn ka gɛlɛya kan—a ka c’a la, o ye funteni walima kemikali tiɲɛni taamasyɛn ye

 

Webbing mugulenw walima fɛnɲɛnamafagalanw minnu bɛ don a kɔnɔ

 

Identifikan sɛbɛn min tununna walima min tɛ se ka kalan

 

Tactile Inspection—I bɛ se ka min ye

 

Sɛgɛsɛgɛli ɲɛnama dɔrɔn tɛ bɔli kɛ. Ni sɔgɔsɔgɔninjɛ sintetikiw, kɛrɛnkɛrɛnnenya la sɔgɔsɔgɔninjɛ bulamaw, a ka c’a la, kɔnɔna tiɲɛni bɛ dɔn ni magali dɔrɔn ye:

 

Aw bɛ sɔgɔsɔgɔninjɛ kuru  a janya la ani ka mankanw lamɛn minnu bɛ ka kirin—kɔnɔna fiɲɛ karilenw

 

Aw bɛ webbing digi  bolokɔni ni bolokɔniden cɛ; dusukunnata nɔgɔlen walima min tɛ bɛn ɲɔgɔn ma, o bɛ kɔnɔna tiɲɛni jira

 

Aw bɛ aw hakili to kurukuruw la minnu ɲɛfɔlen tɛ —sɔgɔsɔgɔninjɛ bulama kɔnɔ, kuru gɛlɛn min bonya bɛ i n’a fɔ pɔmutɛri, o bɛ se ka kɛ dunanfɛn ye, nka ni a bonya ka bon, a ka gɛlɛn ka tɛmɛ a janya kan,  o bɛ se ka a jira ko a kɔnɔna dɛsɛra

 

Sɛgɛsɛgɛli kɛcogo min bɛ kɛ tuma caman na—Siɲɛ joli?

 

 

Sling minnu bɛ baara jugu la (funteni caman, kemikaliya, doni girinmanw) ka kan ka sɛgɛsɛgɛ ka caya— kalo saba o kalo saba sɛgɛsɛgɛli  ka ɲi sigidaw la minnu ka gɛlɛn.

 

 

Baarakɛ waati janya—Cɛsirilan ka kan ka mɛn waati joli kɔnɔ?

 

Kɔrɔta cɛsirilan si tɛ  mɛn fo abada—nka ni a ladonna ka ɲɛ, o bɛ baara kɛ ni a si janya kosɛbɛ.

 

Baarakɛcogo sɛbɛnw minnu sɛbɛnnen don

 

Dongfang Lishen  b’a ɲini ka baarakɛcogo marayɔrɔ dɔ sigi sen kan sɔgɔlan kelen-kelen bɛɛ kama. Sɛbɛn min ladonna ka ɲɛ, o dɔw ye ninnu ye:

 

Baara fɔlɔ don ani a bilali baara la sɛgɛsɛgɛli

 

Kɔrɔta jate ni doni bonya baara kelen-kelen bɛɛ la

 

Hitch suguya minnu bɛ kɛ (vertical, choked, basket, wdfl) .

 

Lamini cogoya minnu bɛ sɔrɔ (funteni jiginni, kemikɛli, UV) .

 

Sɛgɛsɛgɛli jaabiw bɛɛ—don, sɛgɛsɛgɛlikɛla, sɔrɔw, ani wale minnu kɛra

 

Nin kunnafonidilan in bɛ se ka kɛ sababu ye ka fɛnw falen-falen kofɔlenw bila u nɔ na : ka sɔgɔsɔgɔninjɛw lafiɲɛbɔ sani u ka se dɛsɛyɔrɔ gɛlɛn dɔ ma, sanni u ka se o kɔfɛ.

 

Lakɔlibila sariyaw—Ni ka kan ka fɛnw tiɲɛ tuma min na

 

Ka kɛɲɛ ni izini sariyaw ye ani a dilannikɛlaw ka laadilikanw ye, aw bɛ cɛsirilan kɔrɔtalen dɔ tiɲɛ joona ni:

 

Sɛgɛsɛgɛli bɛ se a bonya fɔlɔ 1/10 ma

 

Tigɛ minnu bɛ ye, sɔgɔsɔgɔninjɛ jugumanba, walima yɔrɔ dɔ karilen sɔgɔli farikolo la

 

Stitching pull-out, cracking, walima sɛgɛn jugumanba doni-ta-yɔrɔw la

 

Kemisɛnniw ka jeninida, asidi/alkali tiɲɛni, walima funteni tiɲɛni (ka wuli/ka wuli) .

 

Nɔgɔ, nɔgɔ walima toli

 

UV tiɲɛni min bɛ jira ni bleaching, jɛman walima surface peeling ye

 

Kurukuruni jugumanba, a bɔgɔbɔgɔli walima a bɛ kɛ fɛn ye min bɛ wuli

 

Nɛgɛdagalanw bɛ sɔgɔli, fɛn tiɲɛnen walima karilen jira

 

Lakɔlɔsili sɔgɔli bilenmanw bɛ ye—o b’a jira ko sɔgɔlilan doni ka ca kojugu

 

Sariyakolo jɔnjɔn: ni siga bɛ i la, i k’a tiɲɛ. Kɔrɔta cɛsirilan min bɛ wuli ka bila a nɔ na, ​​o musaka ka dɔgɔ kosɛbɛ ka tɛmɛ doni binna kan, joginni walima mɔgɔ fagali kan.

 

Kuma surun ani Takeaways nafamaw

 

Kɔrɔta cɛsirilan ye fɛn ye min dilannen don ni ɛntɛrinɛti ye, a tɛ jagofɛn ye. Ladonni ɲuman, n’o ye saniya, a marali ani a sɛgɛsɛgɛli ye—o bɛ nɔ bila a fanga la, a ka dannaya la, ani a ka baara waati la. O dɛsɛ musaka tɛ jate dɔrɔn sɔgɔlifɛnw falenni na, nka u bɛ jate minɛn tiɲɛnenw na, porozew ka mɛnni na, ani lakana tiɲɛnenw na.

 

Waleya duuru minnu ka kan ka waleya bi:

 

Aw bɛ fɛn marayɔrɔ dɔ sugandi min jalen don, min lakananen don ni UV ye, ani min funteni bɛ se ka kɔlɔsi.

 

Aw bɛ saniyacogo sɛbɛn dɔ bila—safinɛ nɔgɔman, ji nɛnɛ, fiɲɛ jalen dɔrɔn. Fɛnɲɛnamafagalan tɛ yen. Funteni tɛ yen.

 

Aw ye aw ka kulu dege u ka se ka magali sɛgɛsɛgɛli kɛ, aw kana a lajɛ ni ɲɛnayeli dɔrɔn ye.

 

Aw bɛ baarakɛcogo sɛbɛn dɔ dilan sling kelen-kelen bɛɛ kama—track lift jatew ani exposure conditions.

 

Aw bɛ lakɔlibila sariya gɛlɛn dɔ ta—ni a bonya ye 1/10 ye walima ni kɔnɔna tiɲɛni taamasiɲɛ o taamasiɲɛ bɛ a la, aw bɛ o tiɲɛ.

 

Dongfang Lishen  bɛ poliyesitɛri kɔrɔta cɛsirilanw dilan ni seko taamasiyɛn jɛlenw ye minnu kulɛri kofɔlen don, minnu bɛ bɛn EN 1492 ni JB/T 8521 sariyaw ma, wa u dilannen don walasa u ka mɛn ni u ladonna ka ɲɛ. An ka fɛn dilannenw bɛ sɔrɔ ka bɔ tɔni 1 na ka se tɔni 10 ma, ni doni tacogo sɔgɔli ni poliyesitɛri fɛn kɔrɔlen kelenw sirili ye walasa ka tiɲɛni faratiw bɔ yen minnu tɛ bɛn ɲɔgɔn ma.

 

Ni aw mago bɛ ladonni ladilikanw na minnu bɛ bɛn aw ka baarakɛcogo kɛrɛnkɛrɛnnenw ma—a kɛra kemikɛli gɛlɛnw ye, funteni jugumanba, walima baara kɛcogo caman ye—aw bɛ se ka bataki ci o ma sales@lishenflex.com , ani an ka baarakɛlaw ka jɛkulu bɛna dɛmɛ di mɔgɔ kelen-kelen bɛɛ ma.